Skip to header
OHARA INC.
English
Products and ServiceAbout OHARAInvestor RelationsContact Us

Products and Service
Home  > Products and Service  > Electronics Products  > Lithium-ion Conductive Glass-ceramics (LICGC)
 
Lithium-ion Conducting Glass-ceramics  (LICGC)
 
 

LICGCAG-01

 

LICGCAG-01 Properties

Ionic Conductivity
1 ×10-4Scm-1(25°C)
Chemical
Properties
RW(P)JOGIS1 (Water resistance)
RW(A)JOGIS1 (Acid resistance)
Fully stable in air
Mechanical
Properties
Bending Strength(4 points)140N/mm2
Knoop Hardness Hk 590
Specific Gravity 3.05
Piercing breaking strength≈10N
(measurement device Digital Force Gauge SHINPO FGS-20TV Terminal R3.0 purpose-built nut,testing device cooling speed 25mm/min.)
Thermal
Properties
Coefficient Thermal Expansion10-7/K
30~350°C 94
350~600°C 82

*Above-mentioned properties are reference values and are not guaranteed.
Properties are subject to change as our products are developed.

 

Characteristics of LICGC AG-01

Ionic conductivity(1×10-4Scm-1) (25°C)


LICGCAG-01 is ideally suited for use as a solid electrolyte in electro-chemical devices due to it's high Li ion conductivity

 

LICGCAG-01 Material Profile

Composition

Li2O-Al2O3-SiO2-P2O5-TiO2-GeO2-System


Crystalline phase

Li1+x+yAlx(Ti,Ge)2-xSiyP3-yO12
(Li replaceable NASICON type)


 

LICGCAG-01 product shapes

Standard product size

The LICGC electrolytes in these photos have been fine polished on both faces.
Please feel free to contact us for further information or to discuss your requirements.



LICGCAG-01 Tubes

Through the use of precise three-dimensional processing and heat-treatment, we are now able to supply 2 types of LICGC(AG-01)Tubes, as shown below:



 

Available Size:
10mm Outer dia.,8mm Inner dia. x 50mm Length
(Sealed on 1 end and open on the other)


  photo
 

10mm Outer dia., 8mm Inner dia. x 50mm Length
(Open on both ends)

  photo

*Above-mentioned contents are subject to change as our products are developed.



LICGCAG-01 Thin Plate

In response to our customers' requests, we are now able to supply thinner LICGC(AG-01) plates than we previously offered, as shown below.

 

 

Available Size:
☐25mm×0.02mmt
☐25mm×0.05mmt
☐50mm×0.02mmt

  photo

*Above-mentioned contents are subject to change as our products are developed.

 
To the top of the page
 

Products and Service
 
 
|  Site Map  |  Protection of the Personal Information  |  Location  | (c) OHARA INC. All rights reserved.